حقيبة التسوق فارغة، إبدأ التسوق
All Products
Simple on-site processing. Accommodating PV cable with different insulation diameters. Mating safety provided by keyed housings. Rated current 40A(2.5-6mm2) Rated voltage 1000v DC Degree of protection IP67 Flame class UL94-VO Safety class Ⅱ Temperature range -40℃~+125℃
AED25.00
Type Solar connector supplied with Male and Female (2 In - 1 Out) Rated current 30A Rated voltage 1000V DC Test voltage 6000V(50Hz, 1min) Overvoltage type/pollution degree CAT Ⅲ /2 Contact resistance of plug connector 1mΩ Contact material : Copper, Tin-plated Insulation material PA/PRO Degree of protection IP67 Flame class UL94-VO Safety class Ⅱ Temperature range -40℃~+110℃
AED50.00
SINGLE CORE CABLES, FOR PHOTOVOLTAIC AND SOLAR SYSTEM USE, ELASTOMERIC COMPOUND INSULATED AND SHEATHED. FLAME RETARDANT, HALOGENFREE AND LOW SMOKE FLEXIBLE CABLES FOR FIXED LAYING, LIFETIME TESTING 20.000 h/120°C Sheath colour: Black Operating temperature: -40 C / 90 C on the conductor Overload temperature: 120 C on the conductor Expected lifetime: >25 years Rated voltage: 1800 V DC Max. temp in case of short circuit: 250 C on the conductor (max. duration 5 seconds) Min. bending radius: 4 x outer diameter of the cable Min. installation temperature: -25 C Max. laying stress during installation: 50N/mm2 STANDARDS: TÜV-Rheinland 2 Pfg 1169/08.2007 IEC 60216-1 IEC 60216-2
AED125.00
FSP-D40 2P DC SPD Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the dc power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.
AED120.00
FPV-63 2P DC MCB supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already protection or not required. Devices are designed for direct current (DC) control circuit applications.
AED100.00
FSP-A 4P AC SPD series surge protection device (in short SPD,alias:surge suppressor surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, power supply system of AC 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1, GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the SPD fails in breakdown for over heat and over-current, the failure rlease will help electric equipments separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.
AED200.00
FSP-A 2P AC SPD series surge protection device (in short SPD,alias:surge suppressor surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, power supply system of AC 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1, GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the SPD fails in breakdown for over heat and over-current, the failure rlease will help electric equipments separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.
AED0.00
FDS-32 dc fuse link A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays (reverse current, multi-array fault).
Solar MC4 crimping
يرجى ادخال بريدك الإلكتروني المرتبط بالحساب وسيتم ارسال رابط لإعادة ضبط كلمة المرور.