حقيبة التسوق فارغة، إبدأ التسوق
All Products
12v Absorbed Glass Mat Battery C10: 86AH / C20: 100AH / C100: 110AH 1200 cycles at 50% DoD
AED1050.00
VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life. Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Rated capacity: 20 hr. discharge at 25°C Float design life: 12 years at 20°C Cycle design life: 500 cycles at 80% discharge 750 cycles at 50% discharge 1800 cycles at 30% discharge CCA : 450 Weight : 33 kg Dimension l x w x h : 330 x 171 x 220 in mm
AED1100.00
The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse, the built in battery monitor accurately monitors the state of charge on your battery. Use the Color Control GX for reading out the information. Part of the modular Lynx distribution system.
AED1200.00
The LFP battery series is based on prismatic cells using battery cells with this robust chemistry provides a battery module with a high energy density and extended cycle life. Battery safety is improved, thanks to the thermal and chemical stability of this particular chemistry. The high charge and discharge capability makes this battery suitable for high power applicatihigh-power
AED0.00
VRLA AGM: design life 7-10 years The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.
AED80.00
ELECTRICAL SPECIFICATIONS Nominal capacity:10Ah Open circuit voltage:13.2V Self-discharge:<3% per month Cycle life:>1000 (at 10C discharge, 100% DoD) EqPb (Equals Lead acid battery):20 to 32Ah Voltage:12V MECHANICAL SPECIFICATIONS Dimensions (LxWxH)-120 x 82 x 124mm / 4.72” x 3.23” x 4.88” Weight-1.7 kg / 3.7 lbs Case material-PC - ABS Ingress protection-IP69 Cell type / Chemistry-Cylindrical - LiFePO4 CHARGE & DISCHARGE SPECIFICATIONS Charge method-CCCV Charge voltage-14.3V - 14.6V Max. charge current-37A End of discharge voltage-8V Discharge current continuous-160A Discharge pulse current-493A (49C) (1 sec) TEMPERATURE SPECIFICATIONS Charge temperature:0°C to 55°C / 32°F to 131°F Discharge temperature:-30°C to 55°C / -22°F to 131°F Storage temperature:-40°C to 60°C / -40°F to 140°F
<p class='MsoNormal' style='box-sizing: border-box; margin-top: 2.4rem; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff'><span lang="en-NL" style="box-sizing: border-box">Building upon the success of our Lithium Smart Series, the NG (Next Generation) series incorporates significant enhancements.</span></p><p class='MsoNormal' style='box-sizing: border-box; margin-top: 2.4rem; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff'><span lang="en-NL" style="box-sizing: border-box">Highlights:</span></p><ul style='box-sizing: border-box; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff'><li style="box-sizing: border-box; margin-bottom: 5px; padding-left: 15px">Multiple improvements including added read-out of cell voltages and temperatures;</li><li style="box-sizing: border-box; margin-bottom: 5px; padding-left: 15px">Maximum single bank size increased to 385kWh;</li><li style="box-sizing: border-box; margin-bottom: 5px; padding-left: 15px">Modules available in 12, 24 and 48V;</li><li style="box-sizing: border-box; margin-bottom: 5px; padding-left: 15px">Protection class IP65;</li><li style="box-sizing: border-box; margin-bottom: 5px; padding-left: 15px">Bracket mounting and strap mounting. </li></ul><p class='MsoNormal' style='box-sizing: border-box; margin-top: 2.4rem; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff'>Tailored for those seeking advanced and reliable energy storage, the Lithium NG series marks a pivotal advancement in our product lineup, ready to meet the demands of tomorrow.</p>
AED9300.00
<div>Scalable from 5 kWh to 160 kWh</div><div>Maximum Flexibility for any Application with</div><div>up to 32 Packs Connected in Parallel</div><div>Lithium Iron Phosphate (LFP) Battery:</div><div>Maximum Safety, Lifespan and Power</div><div>High Energy Density and Operational Reliability</div><div>Application: Residential Energy Storage</div>
AED4000.00
ELECTRICAL SPECIFICATIONS Nominal capacity:15Ah Open circuit voltage:13.2V Self-discharge:<3% per month Cycle life:>1000 (at 10C discharge, 100% DoD) EqPb (Equals Lead acid battery):40 to 60Ah Voltage:12V MECHANICAL SPECIFICATIONS Dimensions (LxWxH)-120 x 82 x 181mm / 4.72” x 3.23” x 7.13” Weight-2.4 kg / 5.4 lbs Case material-PC - ABS Ingress protection-IP69 Cell type / Chemistry-Cylindrical - LiFePO4 CHARGE & DISCHARGE SPECIFICATIONS Charge method CCCV Charge voltage- 14.3V - 14.6V Max. charge current- 52A End of discharge voltage- 8V Discharge current continuous- 240A Discharge pulse current- 708A (47C) (1 sec) TEMPERATURE SPECIFICATIONS Charge temperature: 0°C to 55°C / 32°F to 131°F Discharge temperature: -30°C to 55°C / -22°F to 131°F Storage temperature: -40°C to 60°C / -40°F to 140°F
AED150.00
Introducing the BYD Battery-Box Premium LV Flex Lite 5.0kWh/48VDC, the ultimate power source for all your energy needs. Powered by advanced lithium battery technology, this BYD Lithium Battery is designed to deliver exceptional performance and reliability. Whether you're looking for a reliable energy backup system or seeking to reduce your carbon footprint, this innovative lithium battery is the perfect solution. With its cutting-edge design and superior engineering, the BYD Battery-Box Premium LV Flex Lite stands out among other lithium batteries in the UAE market. Its compact size and lightweight construction make it easy to install and integrate into any space. Say goodbye to bulky and heavy batteries, and embrace the convenience of this sleek and efficient power storage solution. Featuring a 5.0kWh capacity and a voltage of 48VDC, this lithium battery offers ample energy storage for your residential or commercial needs. Experience uninterrupted power supply during blackouts or utilize stored energy during peak demand periods to reduce electricity costs. With its high energy density and long cycle life, you can rely on this battery to provide consistent power for years to come. One of the standout features of the BYD Battery-Box Premium LV Flex Lite is its flexibility. It allows for parallel connection of up to four batteries, enabling you to expand your energy storage capacity as your needs grow. This scalability ensures that you always have enough power to meet your requirements without any hassle. Please refer to the Minimum Configuration List for BYD Battery-Box LV Flex to ensure compatibility with inverters. The installation method can be either with or without a rack. The DC usable energy has been tested under conditions of 100% DOD and 0.2C charge and discharge at +25°C. However, the system's usable energy may vary depending on the brand of the inverter used. The charge rating will occur between -10°C and +5°C. This battery is ideal for bespoke projects and integrated systems, with scalability ranging from 5 kWh to 320 kWh. It offers maximum flexibility for any application with up to 64 modules connected in parallel. The battery is compatible with market-leading 1 and 3 phase inverters. It is a cobalt-free lithium iron phosphate (LFP) battery that provides maximum safety, lifespan, and power. It is capable of high-powered emergency backup and off-grid function. Additionally, it optimizes self-consumption for residential and commercial applications.
AED6700.00
The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. *Lightweight, high-performance battery. *Space-saving. *Maintenance-free. *Built-in solar energy, regulating and charge unit. *Can be kept in storage for a year (low self-discharge). *Regulating system for extra-long service life. *Li-ion system with internal charger. Peak Power Pack PPP-40 Capacity 40Ah Stored energy 512Wh Battery type Lithium-ion (LiFePO4) Nominal voltage 12.8V Self-discharge when activated < 13 Ah /year (< 1.4 mA) Self-discharge in storage mode < 6.5 Ah /year (< 0.7 mA) Output 1: high capacity “mover” Continuous output current 150A Maximum output current (10 seconds) 200A Short-circuit current 300A Safety features :: Overload / short-circuiting / temperature / excessive discharge Maximum charging current :: 20A (no protection) Recommended charging voltage 14V (no protection) Maximum charging voltage 14.2V (no protection) Maximum cable diameter 16mm² (screw clamps) Output 2: on-board power network “domestic” Continuous output current 30A Maximum output current (10 seconds) 50A Short-circuit current 80A Safety features : Overload / short-circuiting / temperature / excessive discharge Maximum charging current : 10A (no protection) Recommended charging voltage : 14V (no protection) Maximum charging voltage : 14.2V (no protection) Maximum cable diameter : 6mm²(screw clamps) Input 1: “car/solar” Input voltage range 11 V < Vin < 25 V Current limitation 7A Input 2: “adapter” Output voltage 15V Output current 3A Input voltage 110 / 230 V 50 / 60 Hz General Operation Multifunctional push-button with dual-colour LED VE.Direct port Communication with a smartphone (VE.Direct Bluetooth Smart-dongle required) Connection to a PC (VE.Direct to USB cable required) Operating temperature Battery charging: 0°C to 40°C Battery discharge: -20°C to +40°C Storage: -20°C to +40°C (charging and discharging not possible outside the given temperature range) Humidity (no condensation) Max. 95% Weight 8.6kg Dimensions (h x w x d) 212 x 190 x 172 mm Standards Safety NEN-EN-IEC 60335-1, NEN-EN-IEC 60335-2-29, NEN-EN-IEC 62109-1 Emission / Immunity NEN-EN 55014-1, NEN-EN 55014-2, NEN-IEC 61000-3-2, NEN-IEC 61000-3-3, NEN-EN 50498
AED2200.00
VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life. Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Rated capacity: 20 hr. discharge at 25°C Float design life: 12 years at 20°C Cycle design life: 500 cycles at 80% discharge 750 cycles at 50% discharge 1800 cycles at 30% discharge Weight : 49 kg Dimension l x w x h : 485 x 172 x 240 mm
AED1600.00
Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications. They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Rolls AGM batteries are sealed, maintenance free, non-hazardous and nonspillable. You will never need to add water to a Rolls AGM battery or worry about gassing or spilling of acid. Operated upright or on their side, Rolls AGM batteries are also leak proof, shock and vibration resistant. Rolls AGM batteries provide the performance and life of a true deep cycle battery with all the convenience and benefi ts of being maintenance free & non hazardous.
AED1725.00
The HE battery series is based on a high energy density battery cell. This means more energy in less weight. The integrated battery management system brings the highest standard on safety and gives insight in the status of the battery. Flexibility in system configuration is created by a modular design. On a system level a voltage range of 25.2 V up to 465 V and a capacity range of 2.5 kWh up to 720 kWh can be created with the 25.2 V modules.
AED22715.00
Cold Crank Amps (CCA) 0°F / -17°C 1550 Marine Crank Amps (MCA) 32°F / 0°C 1850 Reserve Capacity (RC @ 25A) 400 Minutes Reserve Capacity (RC @ 75A) 160 Minutes Capacity Affect by Temperature : 40°C 102 % ; 25°C 100% ; 0°C 85% ; -15°C 65% Weight 73 kg Dimension : L x W x H 522 x 268 x 224 mm
AED2425.00
The GEL model range offers best deep cycle durability and overall longer life. The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particularly low self-discharge so that they will not go flat during long periods without charge. Both ranges are supplied with M8 drilled, flat copper terminals ensuring best possible connection contact and eliminating the need for battery terminals.
AED2050.00
Maximum number of batteries in series 2 (= 48 V) Maximum number of batteries in parallel 48 Supply voltage range 18 ... 58 VDC Main safety contactor current continuous 400 A Communication CAN-Bus (NMEA2000, SMA, custom on request) IO Aux. output 13,5 V / 1 A, short circuit protection, overcurrent protection Allow-to-charge (switched voltage) 13,5 V / 1 A, short circuit protection, overcurrent protection Allow-to-discharge (switched voltage) 13,5 V / 1 A, short circuit protection, overcurrent protection Allow-to-charge (relay output) 0,8 A @ 60 VDC, potential free Allow-to-discharge (relay output) 0,8 A @ 60 VDC, potential free Programmable contact (relay output) 0,8 A @ 60 VDC, potential free External status signal 13,5 V / 140 mA short circuit protection, overcurrent protection Emergency shutdown input (available on M12 CAN-bus connectors) : Emergency shutdown to open main contactor hardwired. (To order with M12 connectors use M12 as suffix. Example: MGMLV481000M12) Enclosure Material ABS (reinforced) Dimensions 426 x 225 x 117 mm Weight 9,4 kg Environmental Operating temperature range -20 °C to 50°C Humidity Max. 95% (non-condensing) Protection class IP22
AED5050.00
AED2500.00
Control unit required for BYD battery-box Premium LVS batteries. One BMU per system is required. The BMU is capable of managing all the batteries in the system
AED630.00
ELECTRICAL SPECIFICATIONS Nominal capacity:20Ah Open circuit voltage:13.2V Self-discharge:<3% per month Cycle life:>1000 (at 10C discharge, 100% DoD) EqPb (Equals Lead acid battery):70 to 100Ah Voltage:12V MECHANICAL SPECIFICATIONS Dimensions (LxWxH):255 x 101 x 171mm / 10.0” x 4.0” x 6.7” Weight:4.6kg / 10.1lbs Case material: PC - ABS Ingress protection: IP66 Cell type / Chemistry: Cylindrical - LiFePO4 CHARGE & DISCHARGE SPECIFICATIONS Charge method:CCCV Charge voltage:14.3V - 14.6V Max. charge current:66A End of discharge voltage:8V Discharge current continuous:260A Discharge pulse current:892A (45C) (1 sec) TEMPERATURE SPECIFICATIONS Charge temperature: 0°C to 55°C / 32°F to 131°F Discharge temperature: -30°C to 55°C / -22°F to 131°F Storage temperature: -40°C to 60°C / -40°F to 140°F
AED210.00
AED3000.00
VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. Here the electrolyte is immobilized as gel. Gel batteries in general have a longer service life. Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Rated capacity: 20 hr. discharge at 25°C Float design life: 12 years at 20°C Cycle design life: 500 cycles at 80% discharge 750 cycles at 50% discharge 1800 cycles at 30% discharge
Maximum number of batteries in series 2 (= 48 V) Maximum number of batteries in parallel 48 Supply voltage range 18 ... 58 VDC Main safety contactor current continuous 1000 A Communication CAN-Bus (NMEA2000, SMA, custom on request) IO Aux. output 13,5 V / 1 A, short circuit protection, overcurrent protection Allow-to-charge (switched voltage) 13,5 V / 1 A, short circuit protection, overcurrent protection Allow-to-discharge (switched voltage) 13,5 V / 1 A, short circuit protection, overcurrent protection Allow-to-charge (relay output) 0,8 A @ 60 VDC, potential free Allow-to-discharge (relay output) 0,8 A @ 60 VDC, potential free Programmable contact (relay output) 0,8 A @ 60 VDC, potential free External status signal 13,5 V / 140 mA short circuit protection, overcurrent protection Emergency shutdown input (available on M12 CAN-bus connectors) : Emergency shutdown to open main contactor hardwired. (To order with M12 connectors use M12 as suffix. Example: MGMLV481000M12) Enclosure Material ABS (reinforced) Dimensions 426 x 225 x 117 mm Weight 9,4 kg Environmental Operating temperature range -20 °C to 50°C Humidity Max. 95% (non-condensing) Protection class IP22
AED7565.00
Nominal voltage (V) at 50% SoC, 0,2C discharge 12.8V Rated capacity (Ah) 160 Energy (Wh) 2060.8 Charge method CCCV End of charge voltage (V) 14.6V Max charge current (A) 160A (1C) End-of-discharge voltage (V) 8V Max. continuous discharge current (A) 480A (3C) Discharge pulse current (A) (10 seconds) 800A (5C) Operating temperature range (Charge) 0°C to 45°C Operating temperature range (Discharge) -10°C to +55°C Storage temperature range short term (1 month) -20°C to +45°C Storage temperature range long term (> 1 month) -10°C to +20°C Height (mm) 314 x Width (mm) 417 x Thickness (mm) 227 Weight 26.9 kg
AED12000.00
AED550.00
AED800.00
Introducing the BYD Battery-Box Premium LVL 15.4kWh -51.2V, the ultimate solution for all your energy storage needs. This cutting-edge lithium battery is here to revolutionize the way you power your home or business. With its exceptional performance and advanced technology, it's no wonder that BYD is at the forefront of the lithium battery industry. Designed with precision, this BYD Lithium Battery offers an impressive capacity of 15.4kWh, ensuring a reliable and long-lasting power supply. Whether you're looking to power your off-grid cabin or reduce your reliance on the grid, this battery will exceed your expectations. One of the standout features of the BYD Battery-Box Premium LVL is its high energy density, providing you with more power in a compact size. This means you can maximize your space while enjoying ample energy storage capacity. Not only does this lithium battery offer exceptional performance, but it also boasts a long cycle life, ensuring that it will serve you for years to come. Say goodbye to frequent battery replacements and hello to a sustainable and cost-effective energy solution. Safety is paramount when it comes to energy storage, and the BYD Battery-Box Premium LVL doesn't disappoint. It incorporates state-of-the-art battery management systems to protect against overcharging, over-discharging, and short circuits. You can have peace of mind knowing that your investment is backed by advanced safety features. Versatility is another key selling point of this lithium battery. Whether you're integrating it into an existing solar system or using it as a standalone power source, the BYD Battery-Box Premium LVL seamlessly adapts to your needs. Discover the future of energy storage with the BYD Battery-Box Premium LVL 15.4kWh -51.2V. Experience unparalleled performance, reliability, and safety in one compact package. Invest in this lithium battery today and take control of your energy consumption like never before.
AED26500.00
ELECTRICAL SPECIFICATIONS Nominal capacity-105Ah Open circuit voltage-13.2V Self-discharge-<3% per month Cycle life->3500 cycles (100% DoD) Voltage-12V MECHANICAL SPECIFICATIONS Dimensions (LxWxH)- 437 x 90 x 175 mm / 17.2” x 3.5” x 6.9” Weight- 10 kg / 22 lbs Case material- PC-ABS | UL94-V0 Ingress protection- IP66 Cell type / Chemistry- Prismatic - LiFePO4 CHARGE & DISCHARGE SPECIFICATIONS Charge method: CCCV Charge voltage: 14.3V - 14.6V Max. charge current: 105A End of discharge voltage: 10V Discharge current continuous: 105A Discharge pulse current: 315A (30 sec) TEMPERATURE SPECIFICATIONS Charge temperature:0°C to 55°C / 32°F to 131°F Discharge temperature: -20°C to 55°C / -4°F to 131°F Storage temperature: -20°C to 45°C / -4°F to 113°F
The SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed.
AED5500.00
AED1020.00
Height (mm) 314 (+/-1) Diameter (mm) NA Width (mm) 417 (+/- 1) Thickness (mm) 227 (+/- 1 Open circuit voltage 13,2V Nominal voltage 12,9V Charge method CCCV Charge voltage 14,3…14,6V Charge current 100A End of discharge voltage 8V Discharge current continuous 300A (3C) Discharge current (10 seconds) 500A (5C) Weight 18,5kg (+/ -0.250 kg) Recommended charge temperature range 0°C to +45°C* Discharge operating temperature range -10°C to +55°C Short term storage temperature range -20°C to +45°C Long term storage temperature range -10°C to +20°C
AED8500.00
Battery Module : LVS (4 kWh, 51.2 V, 45 kg) Number of Modules : 1 Usable Energy [1]: 4 kWh Max Cont. Output Current [2] : 65 A Peak Output Current [2]: 90 A, 5 s Dimensions (H/W/D) : 478 x 650 x 298 mm Weight: 64 kg Nominal Voltage: 51.2 V Operating Voltage: 40-57.6 V Operating Temperature: -10 °C to +50°C Battery Cell Technology: Lithium Iron Phosphate (cobalt-free) Communication: CAN / RS485 Enclosure Protection Rating: IP55 Round-Trip Efficiency : ≥95% Scalability [3] : Max. 64 Modules in Parallel (256 kWh) Certification : VDE2510-50 / IEC62619 / CE / CEC / UN38.3 Applications : ON Grid / ON Grid + Backup / OFF Grid Compatible Inverters: Refer to BYD Battery-Box Premium LVS Minimum Configuration List
AED10000.00
The Lithium Battery 100Ah is a high-capacity power source designed for various applications, from marine and RV use to off-grid solar systems.This lithium battery is lightweight, compact, and maintenance-free, making it easy to install and use. It is equipped with advanced safety features to protect against overcharging, over-discharging, and short circuits, ensuring a safe and efficient power supply.Whether you need a reliable backup power source for your home or a portable energy solution for your outdoor adventures, our Lithium Battery 100Ah is the perfect choice. Invest in quality and performance with our lithium battery today.
AED3200.00
High capacity 12.8V 200Ah Lithium Iron Phosphate (LiFePO4) smart battery module with built-in Bluetooth.With bluetooth capabilities, users can monitor their Victron LiFePO4 battery through the Victron Connect app (available for iOS and Android). With its 200Ah capacity, this lithium battery offers an impressive amount of power, making it suitable for use in electric vehicles, solar energy storage systems, and marine applications.The battery is built with advanced lithium-ion technology, ensuring a high energy density and efficient performance.The Lithium Battery 200Ah also boasts a long cycle life, allowing for repeated charging and discharging without compromising its performance.
AED4500.00
Module: LVS (4 kWh, 51.2 V, 45 kg) Number of modules: 2 Usable Power: 8 kWh Max. Output Current: 130 A Peak Output Current: 180 A, 5 s Dimensions (H / W / D): 761 x 650 x 298 mm Weight: 109 kg Nominal Voltage: 51.2 V Scalable from 4 kWh to 256 kWh Maximum Flexibility for any Application that allows Parallel Connection of up to 64 modules Compatible with Leading Inverters in the Single and Three-Phase Market Cobalt free. Lithium Iron Phosphate (LFP): Maximum Safety, Life Cycles and Power High Power Back-Up Capability and Off-Grid Work Patented Pulgin design with no internal cables Optimal for Residential and Commercial Applications
AED17750.00
AED1520.00
The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches as well as engine starting
AED2000.00
Module: LVS (3.84 kWh, 51.2 V, 42 kg) Number of modules: 3 Usable Power: 11.52 kWh Max. Output Current: 195 A Peak Output Current: 270 A, 5 s Dimensions (H / W / D): 923 x 640 x 298 mm Weight: 136 kg Nominal Voltage: 51.2 V
AED23500.00
Battery characteristics Battery-Box LVS 16.0 (16 kWh) Module: LVS (4 kWh, 51.2 V, 45 kg) Number of modules: 4 Usable Power: 16 kWh Max. Output Current: 250 A Peak Output Current: 360 A, 5 s Dimensions (H / W / D): 1227 x 650 x 298 mm Weight: 199 kg Nominal Voltage: 51.2 V
AED30950.00
AED1900.00
This battery is known for its high energy density, fast charging capabilities, and long cycle life, making it a cost-effective and efficient option for those looking for a dependable power source. The LiFePo4 Battery 330 Ah is also lightweight and compact, making it easy to transport and install in a variety of settings.With built-in safety features such as overcharge and over-discharge protection, as well as a wide operating temperature range, this battery offers peace of mind and reliable performance in a range of conditions. Whether you are looking to power your RV, boat, or home, the LiFePo4 Battery 330 Ah is a versatile and durable choice for all your energy storage needs.
AED6300.00
AED7200.00
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option.
AED3150.00
Protects each individual cell of a Victron lithium iron phosphate (LiFePO4 or LFP) battery Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets. The BTVs of several batteries can be daisy chained. Up to five batteries can be paralleled and up to four batteries can be series connected (BTVs are simply daisy-chained) so that a 48V battery bank of up to 1500Ah can be assembled. Please see our LiFePO4 battery documentation for details. The BMS will: - shut down or disconnect loads in case of imminent cell under voltage, - reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below), and - shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature. Protects 12V, 24V and 48V systems The operating voltage range of the BMS: 9 to 70V DC. Communicates with all VE.Bus products The VE.Bus BMS connects to a MultiPlus, Quattro or Phoenix inverter with a standard RJ45 UTP cable. Other products, without VE.Bus can be controlled as shown below: Load Disconnect The Load Disconnect output is normally high and becomes free floating in case of imminent cell under voltage. Maximum current: 2A. The Load Disconnect output can be used to control - the remote on/off of a load, and/or - the remote on/off of an electronic load switch (Battery Protect) Charge Disconnect The Charge Disconnect output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA. The Charge Disconnect output can be used to control - the remote on/off of a charger and/or - a Cyrix-Li-Charge relay and/or - a Cyrix-Li-ct Battery Combiner LED indicators - Enabled (blue): VE.Bus products are enabled. - Cell>4V or temperature (red): charge disconnect output low because of imminent cell over voltage or over temperature. - Cell>2,8V (blue): load disconnect output high.
AED600.00
<p style='box-sizing: border-box; margin: 2.4rem 0px 1.4em; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff; caret-color: #555555'>The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).</p><p style='box-sizing: border-box; margin: 2.4rem 0px 1.4em; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff'><span style="box-sizing: border-box; caret-color: #555555">The main features are:</span></p><p style='box-sizing: border-box; margin: 2.4rem 0px 1.4em; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff'><li style="box-sizing: border-box; margin-bottom: 1.4em; position: relative; padding-left: 15px"><span style="box-sizing: border-box; caret-color: #555555">Built-in 500A or 1000A contactor used as a fallback safety </span>mechanism and also suitable as a remote controllable main system switch.</li><li style="box-sizing: border-box; margin-bottom: 1.4em; position: relative; padding-left: 15px; caret-color: #555555">Battery monitor, indicating state of charge percentage and more data.</li><li style="box-sizing: border-box; margin-bottom: 1.4em; position: relative; padding-left: 15px; caret-color: #555555">Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.</li><li style="box-sizing: border-box; margin-bottom: 1.4em; position: relative; padding-left: 15px; caret-color: #555555">Bluetooth for use with <a href="https://www.victronenergy.com/panel-systems-remote-monitoring/victronconnect" target="_blank" style="box-sizing: border-box; color: #4790d0">our VictronConnect app,</a> for setup and monitoring, including <a href="https://www.victronenergy.com/media/pg/VictronConnect_Manual/en/stored-trends---instant-readout.html#UUID-a249901a-7ebe-9a66-3146-b9f5bb5c77af" target="_blank" style="box-sizing: border-box; background-color: transparent; color: #4790d0">Instant Readout</a> - key data of the BMS at-a-glance.</li><li style="box-sizing: border-box; margin-bottom: 1.4em; position: relative; padding-left: 15px; caret-color: #555555">Local and remote monitoring using a Victron GX device, for example <a href="https://www.victronenergy.com/panel-systems-remote-monitoring/cerbo-gx" target="_blank" style="box-sizing: border-box; color: #4790d0">the Cerbo GX</a> or <a href="https://www.victronenergy.com/panel-systems-remote-monitoring/ekrano-gx" target="_blank" style="box-sizing: border-box; background-color: transparent; color: #4790d0">Ekrano GX</a>.</li></p><p style='box-sizing: border-box; margin: 2.4rem 0px 1.4em; color: #272622; font-family: museo-sans, sans-serif; font-size: 14px; background-color: #ffffff; caret-color: #555555'>The Lynx Smart BMS is part of the modular Lynx Distribution system.</p>
AED4300.00
AED11000.00
يرجى ادخال بريدك الإلكتروني المرتبط بالحساب وسيتم ارسال رابط لإعادة ضبط كلمة المرور.
