حقيبة التسوق فارغة، إبدأ التسوق
All Products
Off-Grid solar inverter : The Inverter RS Smart Solar 48/6000 is a 48V 6kVA Inverter with 450VDC 4kWp PV input. It is used in off-grid solar applications where AC power is required. Combination of an inverter, bi-directional DC-DC converter and MPPT The inverter produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed. Wide MPPT voltage range 80 – 450VDC, with a 120VDC PV startup voltage. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. Display and Bluetooth : The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. Support for AC and DC coupled PV battery charging : The Inverter RS supports the connection of AC coupled PV inverters on the AC output up to 6kVA, and a total battery charging capacity of up to 100A. Frequency Shift Power Control is enabled out of the box, without the need for configuration, reducing installation time. INVERTER DC Input voltage range 38 – 64 V (6) Output Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% (1) Continuous output power at 25°C Increases linearly from 4800 W at 46 VDC to 5300 W at 52VDC Continuous output power at 40°C 4500W Continuous output power at 65°C 3000W Peak power 9 kW for 3 seconds Short-circuit output current 50A Maximum efficiency 96.5% at 1 kW load and 94% at 5 kW load SOLAR Maximum DC voltage 450V Nominal DC voltage 300V Start-up voltage 120V MPPT operating voltage range 80 – 400V (5) Maximum DC input current 18A (4) Maximum PV input power 4000W Maximum DC charging power 4000W CHARGER Charge voltage 'absorption' (V DC) 57.6V Charge voltage 'float' (V DC) 55.2V Maximum charge current 100A Battery temperature sensor Yes Parallel and 3-phase operation : NO Support AC Input from Grid / Generator : NO (Have to use Battery Charger, Please refer Datasheet /Manual) Operating temperature range -40 to +65°C (fan assisted cooling) Protection category IP22 Battery-connection M8 bolts 230 V AC-connection Screw terminals 13 mm² (6 AWG) Weight 11 kg Dimensions (hxwxd) 425 x 440 x 125 mm
AED5145.00
All-in-one solar power solution The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Color Control panel Two outstanding functions: - Prioritizes battery charging by the MPPT charge controller - Connects to the internet, enabling remote monitoring (VRM website) and remote control. AC distribution The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.
AED13000.00
The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.
AED4950.00
The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: • A MultiPlus-II inverter/charger 3KVA • A SmartSolar MPPT -Tr solar charge controller 4000W • A GX device with a 2 x 16 character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
AED8000.00
The package consist of below Materials : • EasySolar-II 48/3000/35-32 MPPT 250/70 GX • A GX device with a 2 x 16-character display. • 8Pc x Mono Panel 445 WP(MONO) Waaree (3560W) • 1Pc x BYD LVS 8.0kWh Lithium Battery • 1Pc x Solar Combiner Box • 1Pc x MEGA FUSE 125A with Holder • 2Pc x MCB 2Pole 25A • Solar Cable 6 sqmm (150 Meters) • 5Pc x MC4 Pair • solar Roof Mounting (for 8Pc x 445W Panel) • 3 Core x 2.5 sqmm Rubber Cable (15 Meter) • 1 Core x 35 sqmm Rubber Battery Cable (8 Meters with lugs) Note : For indoor installation only with proper Air ventilation.
AED31500.00
The Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with 450VDC 4kWp PV input. Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.
AED9000.00
يرجى ادخال بريدك الإلكتروني المرتبط بالحساب وسيتم ارسال رابط لإعادة ضبط كلمة المرور.